|
The Receive module is used for the online-display of the messages received by
the CAN-interface. CAN-messages are shown below the menu- and toolbar of the
Receive module.
|
In the Scroll-mode, received CAN-messages are shown
in the order in which they are received
|
|
|
In the Overwrite-mode, the CAN-messages are sorted
according to their CAN-Identifier. The message received last is displayed. |
In both modes the identifiers, any allocated names and the data fields of the
CAN-messages are entered in the columns of the display field. In the
scroll-mode, the timestamp of the CAN-message is displayed absolute to the
starting time of the canAnalyser or relative to the timestamp of
the previous message. In the Overwrite-mode, the individual messages of an
Identifier are counted.
In both modes it is possible to choose between a decimal and a hexadecimal
display of the Identifiers and/or data.
Before we can receive messages with the Receive module, we must first generate
them. For this, please switch to the program window of the Transmit module.
In the overwrite mode the Receive module supports Data change detection and
Timout detection. These functions are described in
Signal module.
|
